Universal PU Car Side Skirt Pair 0.45 m Black 3D Carbon Fibre Pattern

This universal car side skirt pair is a modified exterior body part intended to alter the lower side appearance of a vehicle. The listing states that fitment is common to all models, which makes it relevant to buyers who want a side-level trim addition rather than a model-specific panel. Each piece measures 0.45 m in length and 0.5 kg in weight. The material is PU, the colour is black, and the finish is described as a 3D carbon fibre pattern. The product sits within the small encirclement category and is classified as an automobile modified part. It is supplied as a pair. No mounting hardware, template, or adhesive is listed, so installation planning is left to the buyer. The data provided covers the essentials: length, weight, material, colour, pattern, fitment statement, and pack format.

Features and Construction

The core construction facts are short and clear. The side skirts are made from PU and finished in black with a 3D carbon fibre pattern. They are sold as a pair, each stated at 0.45 m in length and 0.5 kg in weight. The fitment note says common to all models, and the part is grouped under small encirclement and automobile modified parts. No further construction detail is given in the source, so nothing beyond these points should be assumed.

Material and Build

The stated material is PU, a polymer commonly used for exterior trim components. The source does not provide hardness, flexural strength, temperature tolerance, or UV resistance data, so those qualities cannot be claimed. What is known is that the part is made from PU and has a black 3D carbon fibre pattern finish. The pattern is decorative and the source does not state that real carbon fibre is present. The 0.5 kg weight per piece gives a general idea of handling weight only. Build quality, thickness, and layer structure are not described, so buyers should base their decision on material type, finish, and the universal fitment statement rather than on unstated performance characteristics.

Size and Practical Fit

Each side skirt is listed at 0.45 m in length. No width, height, or thickness is given, so the profile cannot be described in more detail. Because the fitment is common to all models, the buyer is responsible for checking that a 0.45 m piece suits the intended position on their vehicle. The pair format means both sides of the car are covered if one piece is used per side. At 0.5 kg per piece, the parts are light enough to hold in place during a trial fit, but the source gives no load, downforce, or aerodynamic figures, so no such claims apply. The universal description also means no vehicle-specific contour is guaranteed.

Uses and Placement

This product is intended for exterior side placement as a cosmetic modification. Its category, small encirclement, places it at the side of the vehicle rather than across the full body. The universal fitment note broadens the range of vehicles it may suit, but it also means the buyer must assess the fit. The pair can be used on both sides, and the 0.45 m length defines the coverage along the sill area. The black 3D carbon fibre pattern finish gives a defined surface look, while the PU material is the stated base.

Event or Professional Use

For show cars, modified vehicle displays, or workshop projects, a universal side skirt pair can serve as a side-profile styling component. The small encirclement category fits builds where a full body kit is not wanted. The PU material and 3D carbon fibre pattern finish are the stated visual and material facts. Because no mounting hardware or template is included, a workshop or experienced installer would need to plan fixings, alignment, and surface preparation. The 0.45 m length and 0.5 kg weight per piece are the only size figures available, so any professional use should be based on a physical trial fit before permanent attachment. No certification, road-legality statement, or load rating is provided, so these must not be assumed.

Everyday Home Use

For a private owner working at home, the pair can be trial-fitted against the vehicle's lower side to check length and position. The universal fitment means the buyer should measure the intended area and confirm that 0.45 m per piece is suitable. The parts are listed as common to all models, but this does not replace a physical check. At 0.5 kg per piece, they can be handled by one person. No adhesive, screws, or clips are included, so the buyer must source a suitable attachment method. The black 3D carbon fibre pattern finish is the stated appearance, and PU is the stated material. No care products or protective coatings are specified in the source.

Benefits and Buying Value

The practical value of this side skirt pair rests on its stated specification: a pair of PU parts, each 0.45 m long and 0.5 kg, in black with a 3D carbon fibre pattern, listed as common to all models and grouped as a small encirclement modified part. There are no price, saving, or comparison figures in the source, so value must be judged on material, size, finish, and pack format alone. The universal fitment and pair format are the main buying considerations.

Reuse and Low Maintenance

The source provides no care instructions, coating details, or lifespan figures. Only low-risk guidance can be given: keep the PU surface clean using a mild approach suited to exterior trim, and avoid abrasive pads that could dull the 3D carbon fibre pattern. Because no UV or weather-performance data is supplied, no long-term outdoor durability claim can be made. The parts can be removed and refitted if the chosen attachment method allows it, but this depends on the fixings or adhesive used, which are not included. No maintenance schedule, polish type, or protective product is stated.

Why Choose This Product

Choose this pair if you want a universal side-level modification with a stated 0.45 m length, 0.5 kg weight per piece, PU material, black colour, and 3D carbon fibre pattern finish. It is classified as an automobile modified part and as small encirclement, so it suits side-profile changes rather than full-body conversion. The pair format covers both sides. The limits are clear: no mounting hardware, no template, no width or thickness, no performance ratings, and no vehicle-specific fitment guarantee. Buyers who accept those limits and can arrange their own fitting method have the core facts needed to decide.