{"product_id":"laser-welding-machine-foot-switch-with-1-8m-cable-and-2-core-plug-metal-body-foot-pedal-for-spot-welding-and-argon-arc-welding-gun-control","title":"Laser Welding Machine Foot Switch with 1.8m Cable and 2-Core Plug, Metal Body Foot Pedal for Spot Welding and Argon Arc Welding Gun Control","description":"\u003ch1\u003eMetal Welding Foot Switch with 1.8m Cable and Two-Core Plug\u003c\/h1\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"Metal welding machine foot switch with 1.8m cable, two-core plug, rubber pads, and 2-pin connectors\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US14\/1292\/2025-09-28\/original-image\/12535031665147.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThis metal welding foot switch gives you hands-free control over spot welding and argon arc welding gun tasks, so both hands stay free for the workpiece or the gun. It connects through a 1.8m cable with a two-core plug, and a complete set of 2-pin connectors is supplied. The pedal has a metal body with rubber pads on the upper and lower surfaces, and the micro switch inside handles the switching action. It is listed for use with laser welding machines, spot welding equipment, and argon arc welding guns that accept this type of foot control. The source text does not give current ratings, voltage, or IP ratings, so check compatibility with your machine before ordering.\u003c\/p\u003e\n\u003ch2\u003eFeatures and Construction\u003c\/h2\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"Metal welding machine foot switch with 1.8m cable, two-core plug, rubber pads, and 2-pin connectors\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US14\/1292\/2025-09-28\/original-image\/1566268823143.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThe foot switch is built around a metal body and a micro switch, with rubber pads on the top and bottom of the pedal. These details matter in a workshop because the pedal is stepped on repeatedly, so the housing and the switch are the parts that face the most wear. The cable and plug type also determine whether the unit will connect to your welding machine.\u003c\/p\u003e\n\u003ch3\u003eMaterial and Build\u003c\/h3\u003e\n\u003cp\u003eThe body is metal, which gives the pedal a rigid structure under foot pressure. Rubber pads are fitted to the upper and lower surfaces, providing a non-slip contact point for the sole of your shoe and a cushion between the pedal and the floor. Inside, a micro switch handles the on\/off action. The source text describes this as a good micro switch, but no switching life, contact rating, or electrical specification is given, so the build should be judged on the metal body, rubber pads, and micro switch type rather than on performance figures.\u003c\/p\u003e\n\u003ch3\u003eSize and Practical Fit\u003c\/h3\u003e\n\u003cp\u003eThe cable length is the main measurable detail. The title and feature list state 1.8m, while the body text also mentions 2.0m. This difference comes from the source text itself, so the safest approach is to measure your setup before buying. A 1.8m cable is long enough to place the pedal on the floor while the machine sits on a bench or trolley, provided the socket is within reach. The two-core plug and 2-pin connectors are the connection standard to check against your welding machine.\u003c\/p\u003e\n\u003ch2\u003eUses and Placement\u003c\/h2\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"Metal welding machine foot switch with 1.8m cable, two-core plug, rubber pads, and 2-pin connectors\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US14\/1292\/2025-09-28\/original-image\/1735283501846.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThis foot switch is intended for welding tasks where the operator needs to trigger the machine with a foot rather than a hand. It is listed for spot welding, argon arc welding gun use, and laser welding machines. Placement depends on cable reach and on keeping the pedal stable on the floor.\u003c\/p\u003e\n\u003ch3\u003eEvent or Professional Use\u003c\/h3\u003e\n\u003cp\u003eIn a workshop or production setting, a foot switch allows the welder to hold the workpiece or gun with both hands while controlling the weld with one foot. This is useful for short, repeated spot welds where a hand switch would interrupt the workflow. The metal body and rubber pads suit a floor-standing pedal position. The source text does not state a duty cycle, so the unit should be used within the limits of the welding machine it is connected to.\u003c\/p\u003e\n\u003ch3\u003eEveryday Home Use\u003c\/h3\u003e\n\u003cp\u003eFor home workshops and occasional welding projects, the same hands-free control applies. A 1.8m cable gives some freedom to position the pedal away from the machine, and the two-core plug keeps the connection simple. The pedal can be stored on a shelf or under a bench when not in use. Because the source text does not include a current or voltage rating, check that your machine uses a compatible two-core foot switch connection before connecting the pedal.\u003c\/p\u003e\n\u003ch2\u003eBenefits and Buying Value\u003c\/h2\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"Metal welding machine foot switch with 1.8m cable, two-core plug, rubber pads, and 2-pin connectors\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US14\/1292\/2025-09-28\/original-image\/1748730067976.webp\"\u003e\u003c\/div\u003e\n\u003cp\u003eThe practical value of this foot switch comes from freeing up your hands during welding and from having the cable, plug, and connectors supplied as a set. It is a straightforward replacement part rather than a complete welding system, so the buying decision rests on compatibility and on the condition of the pedal you are replacing.\u003c\/p\u003e\n\u003ch3\u003eReuse and Low Maintenance\u003c\/h3\u003e\n\u003cp\u003eThe metal body and rubber pads are the main wear points described in the source text. Keeping the pedal clean and checking the cable and plug for damage before use are sensible, low-risk habits for this type of equipment. The micro switch is enclosed within the pedal, and no service schedule or lifespan is stated, so maintenance should be limited to visual checks and keeping the connectors dry and free from debris.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose This Product\u003c\/h3\u003e\n\u003cp\u003eChoose this foot switch if your welding machine uses a two-core plug connection and you want a metal-bodied pedal with rubber grip pads, a micro switch, and a supplied set of 2-pin connectors. The 1.8m cable length is the key fit consideration, and the source text also mentions 2.0m, so confirm the required reach. No price, warranty, or performance comparison is given in the source text, so the decision should be based on plug type, cable length, and physical compatibility with your welding equipment.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"Metal welding machine foot switch with 1.8m cable, two-core plug, rubber pads, and 2-pin connectors\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US14\/1292\/2025-09-28\/original-image\/22149599108509.webp\"\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"Metal welding machine foot switch with 1.8m cable, two-core plug, rubber pads, and 2-pin connectors\" src=\"https:\/\/images.seoo.uk\/src\/products\/shopify_export\/US14\/1292\/2025-09-28\/original-image\/561597109412.webp\"\u003e\u003c\/div\u003e","brand":"raq4ad-in","offers":[{"title":"Two core","offer_id":55472110043474,"sku":"CJJSBGBG01180-Two core","price":35.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/3383\/5346\/files\/1735283501846.webp?v=1794733369","url":"https:\/\/ivorique.com\/products\/laser-welding-machine-foot-switch-with-1-8m-cable-and-2-core-plug-metal-body-foot-pedal-for-spot-welding-and-argon-arc-welding-gun-control","provider":"Ivorique.com","version":"1.0","type":"link"}