Car Tail Throat Grilled Blue Bend Stainless Steel 63mm Inner Diameter

This car tail throat is a universal exhaust accessory intended for most models with an exhaust pipe diameter within 5.3-3.8 cm, excluding small size vehicles. Made from stainless steel and weighing 320g, it features a grilled blue bend with an oblique mouth. The 63mm inner diameter interface is a key measurement: if your car's exhaust pipe outer diameter is less than 58mm, this tail throat can be used. It is listed for 1.5-2.2 displacement tail throat shapes and curved car models, and it comes in colour options A and B. The source describes the model as one out and two roasted blue bends with an oblique mouth, and it is packed in a carton. Before buying, measure your exhaust pipe to confirm the fit, as no other dimensions or performance data are provided.

Features and Construction

The tail throat is built from stainless steel and shaped with a grilled blue bend and an oblique mouth. Its design is intended for curved car models within the stated displacement range. The construction details available are limited to the material, weight, and interface size.

Material and Build

The product is made from stainless steel, as stated in the source text. Weighing 320g, it is a relatively light component. The model name specifies one out and two roasted blue bends with an oblique mouth. No additional coatings, thicknesses, or durability claims are provided in the source text, so the description remains limited to these facts.

Size and Practical Fit

The inner diameter of the tail throat interface is 63mm. It is suitable for an automobile exhaust pipe with an outer diameter of less than 58mm. The source also gives a broader range of 5.3-3.8 cm exhaust pipe diameter for most models, excluding small size. To judge whether the tail throat is appropriate, measure your exhaust pipe and compare it with these figures. If the pipe is straight, you can choose a straight or curved section; if curved, choose the curved section.

Uses and Placement

This tail throat is designed for the rear exhaust area of a car. It is listed for 1.5-2.2 displacement tail throat shapes and curved car models. Its universal fit is intended to cover most models within the stated diameter range, though small size models are excluded.

Event or Professional Use

For car modification or replacement purposes, the tail throat can be fitted to compatible vehicles. The source does not specify professional installation requirements or specialist tools, so fitting should be based on the measurable interface and exhaust pipe diameter. The grilled blue bend and oblique mouth are the described visual features.

Everyday Home Use

For everyday car owners, this tail throat can replace an existing plain or damaged unit when the sizes match. The 320g weight and stainless steel material are the only build facts given. No maintenance instructions are supplied, so care should be limited to checking fitment and keeping the part clean according to the material.

Benefits and Buying Value

The main buying value comes from the stated measurements and options: a 63mm inner diameter, a suitable exhaust pipe outer diameter under 58mm, two colour choices, and a stainless steel build. These details help you decide whether it matches your vehicle before ordering.

Reuse and Low Maintenance

Because the source does not give care instructions, no specific maintenance routine can be claimed. The stainless steel material is the only basis for practical relevance. Keeping the tail throat clean and checking the fitment against the exhaust pipe are low-risk actions consistent with the source data.

Why Choose This Product

Choose this tail throat if your car has an exhaust pipe outer diameter under 58mm and you want a curved, grilled blue bend with an oblique mouth. It is available in colours A and B and is intended for 1.5-2.2 displacement tail throat shapes. No competitor comparisons, price claims, or performance promises are made here, as the source text does not support them.